FORSTNER KA-KT-TFF

The Forstner KA-KT-TFF series are massive all-in-one slitting and cut-to-length systems. Forstner’s attention to detail and industry leading innovations have made them a worldwide slit and cut-to-length leader. This attention to detail is on display in the KA-KT-TFF. The six roller-bearing infeed guide rollers, angled to match the loop of the coil from a decoiler, help prevent creasing on soft material like copper, aluminum, and zinc as they to guide materials in the pinch rolls. The pinch rolls then pull the material evenly from a decoiler without slipping or twisting; even plastic film can be applied smoothly and evenly with the fully rubberized rolls. The KA-KT-TFF offers so many options and configurations that, regardless of your individual needs, your perfect slitting and cut-to-length system is just a click away.

Category:

Upplýsingar

  • Infeed Roller Guide
  • Infeed Guide with four roller bearings
  • Fully rubberized Pinch Infeed Rollers
  • Electronic Eye
  • Infeed Guide Adjustment
  • Encoder
  • Straightening Rollers
  • Slitting Blade Cover
  • 5 sets of slitting knives
  • Raise/Lower Slitting Shaft
  • Guillotine Shear

Viðbætur

  • Foil finishing 1250 or 1500 mm
  • 35 m/min instead of standard
  • Set of Stripper Rings for slits narrower than 4”
  • Extra wear cutter
  • Automatic raising and lowering of wear knives
    (motorized)
  • Chromed stainless steel guide rollers
  • 5 Sets High Shock/High Chrome slitting blades for stainless slitting, in lieu of STD
  • Cut-to-Length Shear Blade, High Shock/High Chrome for stainless cutting
  • Radio Remote Control for infeed with Powered Decoiler
  • Styrsystem med 6” färgskärm, istället för standard
  • KT-Table 48” – Enable operator access to slit blades without moving material
  • KT-Table 60” – Enable operator access to slit blades without moving material table
  • Perforator Tool, 20ga (1mm) capacity
  • Scrap Rewinder, left or right side.
  • Hydraulic Scissor Table, 4’ x 10’, 24” resting height, 12” stroke
  • 1/2” increment drop of table for stacking, 18” hydraulic movement on rail to access shear and stacked material.

Eiginleikar

KA-KT-TFF Specifications
MachineKA6KA6 CTLKA6-1500KA6-1500 CTL
TypeSlit & Cut-to-LengthCut-to-LengthSlit & Cut-to-LengthCut-to-Length
Straightening Rolls6 -2.75″ (70mm)6 -2.75″ (70mm)6 -2.75″ (70mm)6 -2.75″ (70mm)
Working Width50 inch (1270mm)50 inch (1270mm)60 inch (1500mm)60 inch (1500mm)
Shearing Capacity14ga (2mm)14ga (2mm)14ga (2mm)14ga (2mm)
Slitting CapacitySee Chart-See Chart-
Slitting Shaft4 Inch (100mm)-4 Inch (100mm)-
Slitting Knives5-5-
Speed85 FPM (25MPM)85 FPM (25MPM)85 FPM (25MPM)85 FPM (25MPM)
Weight5600lb. (2545kg)5200lb. (2363kg)6100lb. (2772kg)5700lb. (2590kg)
Height42 Inch (1066mm)42 Inch (1066mm)42 Inch (1066mm)42 Inch (1066mm)
Width72 inch (1828mm)72 inch (1828mm)87 inch (2209mm)87 inch (2209mm)
Depth81 inch (2057mm)81 inch (2057mm)91 inch (2311mm)87 inch (2209mm)
Power6HP (4.5Kw)6HP (4.5Kw)7.0HP (5.25Kw)7.0HP (5.25Kw)
Voltage230V 3phase230V 3phase230V 3phase230V 3phase
Breaker35amp35amp35amp35amp
KA-KT-TFF Slitting Capacity
Steel
Stainless Steel
Aluminum
GaugemmSlitsGaugemmSlitsInchmmSlits
161.673201.130.1052.673
181.254220.8340.07924
2015240.6750.0631.65
240.717260.4870.0451.147
260.5690.0350.899
KA-TFH Slitting Capacity
Steel
Stainless Steel
Aluminum
GaugemmSlitsGaugemmSlitsInchmmSlits
181.153220.7730.0721..843
200.864240.5840.0541.384
220.695260.4650.0431.15
260.497290.3370.0310.797
290.3890.0240.619

Myndband