Slitting and recoiling line for small coils

A compact and inexpensive slitting and recoiling line especially for metal suppliers and such large-scale sheet metal operations as metal roofing suppliers, ventilation duct shops, spiral tube producers, structural-section fabricators, punching shops etc. is an economic complement to high speed slitting lines. The Forstner recoiling line excellently proves for flexible jobs of small and medium volumes.

 

A separator arm with separator discs prevents the stripes from running. The coils are clamped in a stable frame by a clamping bar in a cantilever, manually expandable and motor driven mandrel. An electric motor with frequency converter recoils with an adjustable torque. After finishing the recoiling process the pneumatic pressing rollers hold the coils on the mandrel. One operator is able to bind all coils safely and efficiently. A pneumatically operated scissor lift supports the coils for unloading. The coils can easily be pulled of the mandrel after reducing the diameter on rollers. For the light recoiler an optional undercarriage with rails for an alternative use of a heavier recoiler is available. Light or narrow coils can be tipped 90° with an optional roller tipping table with end stop to vertically store the coils on a pallet. The PLC type SPS-L2 is a simply usable control for any recoiler. A one-man operation is only possible by using the standard footswitch.

Category:

Kostir

  • constant quality: The blanks are precise and free of burrs.
  • lower material cost: The purchase price for large coils is lower than for small coils or sheets.
  • less waste: You slit wide coils accurately and have fewer residual strips.
  • lower personnel cost: The system is operated by one person. You reduce cutting time considerably.
  • more storage capacity: You only need one wide coil per material type.
  • shortened production time: The handling of all types of materials is substantially rationalized by the use of larger coils.

  • simple threading of stripes and coils
  • gentle processing of sensitive material
  • outstanding recoiling quality
  • easy unloading and tipping of small coils
  • one-man operation
  • space-saving because a loop is not necessary
  • low cost

Valmöguleikar

  • additional separator discs
  • additional pressing rollers
  • undercarriage with rails FWS
  • roller tipping table RKT
  • safety fences around the machine/line SI
  • remote control for the recoiler SPS-FF
  • PC-Interface without SPS-RJ45 or with PC software SPS-RJ45SW
  • internet service for remote maintenance/assistance SPS-IS

Eiginleikar

  • FRAME: stable machine frame
  • SEPARATOR ARM: with 7 separator discs
  • MANDREL: manually operated with clamping bar
  • PRESSING ARM: pneumatic pressing rollers to keep coils together
  • SCISSORED COIL LIFT: pneumatically operated for unloading