CIDAN FS PLUS

CIDAN FS PLUS folding machine is strong, exact and almost impossible to wear out. With welded sides, clamping beam with eccentric drive and extra strong lower beam, this machine is designed for the highest productivity levels, low maintenance costs and problem-free operating, year in and year out.

With the FS PLUS you have a finer control of the machine’s operations than you have ever had before. Choose material and thickness from the material table in ProLink and the position of the bending beam will adjust automatically. With the adjustable bending centre the bending beam maintains a constant distance to the radius rail throughout the bending process. The result is perfect radius without causing material stress whatever the thickness, a perfect finish and an almost unsurpassed precision in angles and measurements. FS PLUS makes your work easy and gives top results every time.

Control System ProLink W, with 18.5″ touch screen and graphical programming
Automatic programmable bending center
Automatic programmable sheet thickness settings via the control system
Lower machine load
Straight rail

✉ protaekni@protaekni.is
✆ +354 8678923

Upplýsingar

CIDAN FS PLUS folding machine is strong, exact and almost impossible to wear out. With welded sides, clamping beam with eccentric drive and extra strong lower beam, this machine is designed for the highest productivity levels, low maintenance costs and problem-free operating, year in and year out.

With the FS PLUS you have a finer control of the machine’s operations than you have ever had before. Choose material and thickness from the material table in ProLink and the position of the bending beam will adjust automatically. With the adjustable bending centre the bending beam maintains a constant distance to the radius rail throughout the bending process. The result is perfect radius without causing material stress whatever the thickness, a perfect finish and an almost unsurpassed precision in angles and measurements. FS PLUS makes your work easy and gives top results every time.

Control System ProLink W, with 18.5″ touch screen and graphical programming
Automatic programmable bending center
Automatic programmable sheet thickness settings via the control system
Lower machine load
Straight rail

Category:

Upplýsingar

  • Control System ProLink W, with 18.5″ touch screen and graphical programming
  • Automatic programmable bending center
  • Automatic programmable sheet thickness settings via the control system
  • Divided straight rail 30°
  • Lower beam rail
  • Double sided folding beam rail 7/10 mm (.275″/.394″), with quick change tooling
  • Folding beam rail 20 mm (.984″) with quick change tooling
  • Manual crowning of folding beam rail
  • Foot pedal

Viðbætur

  • 21.5 “widescreen
  • Motorized back gauge FLEXIBLE
  • XTAP – conical bending
  • Motorized back gauge EGS
  • Hardened tooling
  • Squaring Arm
  • Segmented straight rail
  • Segmented radius rail
  • Offline software
  • Safety laser scanner
  • Ball transfers
  • Movable foot pedal on rail
  • Solid front fingers
  • Extra foot pedal
  • Brushes in the back gauge table
  • 3D import
  • Manual conical bending

Eiginleikar

Specifications
Model Folding length Max. Folding capacity Opening height Dimensions Weight Motors
mm (“) Mild steel mm (ga) Stainless mm (ga) Aluminium mm (“) Clamping beam mm (“) Lenght x Width x Height mm (“) kg (lbs) Clamping beam kW (hp) Folding beam kW (hp)
FORMA 32 Combi 3200 (126) 3 (11) 1.9 (14) 4.5 (0.177) 195 (7.7) 4350 (171) x 2340 (92) x 1980 (78) 4900 (10802) 2 x 1.1
(2 x 1.5)
2 x 1.5
(2 x 2)
FORMA 32 Multifold 3200 (126) 3 (11) 1.9 (14) 4.5 (0.177) 195 (7.7) 4350 (171) x 2340 (92) x 1980 (78) 4900 (10802) 2 x 1.1
(2 x 1.5)
2 x 1.5
(2 x 2)
FORMA 41 Combi 4100 (161) 2.5 (12) 1.6 (16) 3.7 (0.146) 195 (7.7) 5365 (211) x 2340 (92) x 1980 (78) 5900 (13007) 2 x 1.1
(2 x 1.5)
2 x 1.5
(2 x 2)
FORMA 41 Multifold 4100 (161) 2.5 (12) 1.6 (16) 3.7 (0.146) 195 (7.7) 5365 (211) x 2340 (92) x 1980 (78) 5900 (13007) 2 x 1.1
(2 x 1.5)
2 x 1.5
(2 x 2)

Myndbönd

Dæmi

Straight rail
Left picture: With fixed bending center and thin material. Good flexibility for angle and moderate stress on machine and material.
Right picture: With adjustable bending center the bending beam follows the material and achieves correct angles and an even radius even with increasing material thickness.

Straight rail with radius 1,5–5 mm
Left picture: With fixed bending center the angle error is greater and clear risk that bending rail and radius rail will collide leading to major machine wear or breakdown.
Right picture: With adjustable bending center the bending beam follows the radius rail perfectly. The radius is even and the risk of cracking or paint damage is minimal.

Viðbætur

  • 21.5 “widescreen
  • Motorized back gauge FLEXIBLE
  • XTAP – conical bending
  • Motorized back gauge EGS
  • Hardened tooling
  • Squaring Arm
  • Segmented straight rail
  • Segmented radius rail
  • Offline software
  • Safety laser scanner
  • Ball transfers
  • Movable foot pedal on rail
  • Solid front fingers
  • Extra foot pedal
  • Brushes in the back gauge table
  • 3D import
  • Manual conical bending

Eiginleikar

Specifications
Model Folding length Max. Folding capacity Opening height Dimensions Weight Motors
mm (“) Mild steel mm (ga) Stainless mm (ga) Aluminium mm (“) Clamping beam mm (“) Lenght x Width x Height mm (“) kg (lbs) Clamping beam kW (hp) Folding beam kW (hp)
FORMA 32 Combi 3200 (126) 3 (11) 1.9 (14) 4.5 (0.177) 195 (7.7) 4350 (171) x 2340 (92) x 1980 (78) 4900 (10802) 2 x 1.1
(2 x 1.5)
2 x 1.5
(2 x 2)
FORMA 32 Multifold 3200 (126) 3 (11) 1.9 (14) 4.5 (0.177) 195 (7.7) 4350 (171) x 2340 (92) x 1980 (78) 4900 (10802) 2 x 1.1
(2 x 1.5)
2 x 1.5
(2 x 2)
FORMA 41 Combi 4100 (161) 2.5 (12) 1.6 (16) 3.7 (0.146) 195 (7.7) 5365 (211) x 2340 (92) x 1980 (78) 5900 (13007) 2 x 1.1
(2 x 1.5)
2 x 1.5
(2 x 2)
FORMA 41 Multifold 4100 (161) 2.5 (12) 1.6 (16) 3.7 (0.146) 195 (7.7) 5365 (211) x 2340 (92) x 1980 (78) 5900 (13007) 2 x 1.1
(2 x 1.5)
2 x 1.5
(2 x 2)

Myndbönd

Dæmi

Straight rail
Left picture: With fixed bending center and thin material. Good flexibility for angle and moderate stress on machine and material.
Right picture: With adjustable bending center the bending beam follows the material and achieves correct angles and an even radius even with increasing material thickness.

Straight rail with radius 1,5–5 mm
Left picture: With fixed bending center the angle error is greater and clear risk that bending rail and radius rail will collide leading to major machine wear or breakdown.
Right picture: With adjustable bending center the bending beam follows the radius rail perfectly. The radius is even and the risk of cracking or paint damage is minimal.

Upplýsingar

  • Control System ProLink W, with 18.5″ touch screen and graphical programming
  • Automatic programmable bending center
  • Automatic programmable sheet thickness settings via the control system
  • Divided straight rail 30°
  • Lower beam rail
  • Double sided folding beam rail 7/10 mm (.275″/.394″), with quick change tooling
  • Folding beam rail 20 mm (.984″) with quick change tooling
  • Manual crowning of folding beam rail
  • Foot pedal

Viðbætur

  • 21.5 “widescreen
  • Motorized back gauge FLEXIBLE
  • XTAP – conical bending
  • Motorized back gauge EGS
  • Hardened tooling
  • Squaring Arm
  • Segmented straight rail
  • Segmented radius rail
  • Offline software
  • Safety laser scanner
  • Ball transfers
  • Movable foot pedal on rail
  • Solid front fingers
  • Extra foot pedal
  • Brushes in the back gauge table
  • 3D import
  • Manual conical bending

Eiginleikar

Specifications
Model Folding length Max. Folding capacity Opening height Dimensions Weight Motors
mm (“) Mild steel mm (ga) Stainless mm (ga) Aluminium mm (“) Clamping beam mm (“) Lenght x Width x Height mm (“) kg (lbs) Clamping beam kW (hp) Folding beam kW (hp)
FORMA 32 Combi 3200 (126) 3 (11) 1.9 (14) 4.5 (0.177) 195 (7.7) 4350 (171) x 2340 (92) x 1980 (78) 4900 (10802) 2 x 1.1
(2 x 1.5)
2 x 1.5
(2 x 2)
FORMA 32 Multifold 3200 (126) 3 (11) 1.9 (14) 4.5 (0.177) 195 (7.7) 4350 (171) x 2340 (92) x 1980 (78) 4900 (10802) 2 x 1.1
(2 x 1.5)
2 x 1.5
(2 x 2)
FORMA 41 Combi 4100 (161) 2.5 (12) 1.6 (16) 3.7 (0.146) 195 (7.7) 5365 (211) x 2340 (92) x 1980 (78) 5900 (13007) 2 x 1.1
(2 x 1.5)
2 x 1.5
(2 x 2)
FORMA 41 Multifold 4100 (161) 2.5 (12) 1.6 (16) 3.7 (0.146) 195 (7.7) 5365 (211) x 2340 (92) x 1980 (78) 5900 (13007) 2 x 1.1
(2 x 1.5)
2 x 1.5
(2 x 2)

Myndbönd

Dæmi

Straight rail
Left picture: With fixed bending center and thin material. Good flexibility for angle and moderate stress on machine and material.
Right picture: With adjustable bending center the bending beam follows the material and achieves correct angles and an even radius even with increasing material thickness.

Straight rail with radius 1,5–5 mm
Left picture: With fixed bending center the angle error is greater and clear risk that bending rail and radius rail will collide leading to major machine wear or breakdown.
Right picture: With adjustable bending center the bending beam follows the radius rail perfectly. The radius is even and the risk of cracking or paint damage is minimal.