CIDAN FX COMBI

The CIDAN FX Combi Series power folder is the strongest metal folding machine of its kind. Equipped with welded side frames for strong stability, twin drive folding and upper beams, and eccentric clamping, this reliable and efficient workhorse offers trouble-free operation and a very low cost of maintenance. The user-friendly control systems allow for easy programming regardless of the user’s experience level.

With a wide variety of customization options available, the CIDAN FX Combi Series power folder is one of the most versatile on the market. CIDAN is the original inventor of the world acclaimed Combi beam that provides the ability to change tools in seconds while the ProLink W comes with a more powerful motor and higher gearing. These options will separate you from the other shops by giving you more flexibility and faster job turn-over.

  • Built for demanding conditions, 100% duty cycle
  • Same opening height regardless of tooling (Combi beam)
  • Versatile and flexible
  • ProLink W control with 15.5” touch screen and graphics programming
  • Solid lower beam to eliminate dimples when hemming aluminum, zinc or copper
  • Variety of options available for added flexibility
  • Generous space around the tools for increased flexibility
  • Automatic material adjustment via the Prolink W control
  • Back gauge EGS or FLEXIBLE (Click here to read more about our back gauges.)

✉ protaekni@protaekni.is
✆ +354 8678923

Upplýsingar

The CIDAN FX Combi Series power folder is the strongest metal folding machine of its kind. Equipped with welded side frames for strong stability, twin drive folding and upper beams, and eccentric clamping, this reliable and efficient workhorse offers trouble-free operation and a very low cost of maintenance. The user-friendly control systems allow for easy programming regardless of the user’s experience level.

With a wide variety of customization options available, the CIDAN FX Combi Series power folder is one of the most versatile on the market. CIDAN is the original inventor of the world acclaimed Combi beam that provides the ability to change tools in seconds while the ProLink W comes with a more powerful motor and higher gearing. These options will separate you from the other shops by giving you more flexibility and faster job turn-over.

  • Built for demanding conditions, 100% duty cycle
  • Same opening height regardless of tooling (Combi beam)
  • Versatile and flexible
  • ProLink W control with 15.5” touch screen and graphics programming
  • Solid lower beam to eliminate dimples when hemming aluminum, zinc or copper
  • Variety of options available for added flexibility
  • Generous space around the tools for increased flexibility
  • Automatic material adjustment via the Prolink W control
  • Back gauge EGS or FLEXIBLE (Click here to read more about our back gauges.)
Category: Tags: ,

Upplýsingar

  • 30° Straight rail
  • ProLink control, with touch screen and graphic programming
  • Segmented straight rail
  • The standard Combi beam offers flexibility like no other tooling system. With a simple rotation of the upper beam, switch between the straight rail and box tooling in a matter of seconds. Form a larger variety of parts with little or no tool changing
  • Folding beam rails 7 mm, 10 mm and 20 mm equipped with bayonet quick change tooling
  • Tooling is made from 42CrMo4 steel, and coated with black oxide to prevent rust
  • Adjustable crowning of folding beam rail.
  • Material thickness sensing on clamping beam
  • Eccentric clamping beam drive-33 tons clamping pressure
  • Speed optimization-when folding beam comes down to 80 degrees, upper beam starts to come up

Viðbætur

    • XSPACE – More space, more profiles – CIDAN XSPACE gives you far greater freedom to design and fold your profiles. XSPACE is the folding beam with an indented angle below the folding point giving you extra space  around the tools. You can now easily make profiles that were previously difficult or impossible to fold and without risk of collisions. The 15 mm extra space below the folding beam rail allows you to fold trapezoid profiles, z-profiles and hat profiles. There is no need to “force” the material into the machine, ergonomics are improved and safety increased. You get higher precision with no effort. All the machine’s features function as normal. The XSPACE-beam is of course equipped with crowning for zero angle deviations for long profiles. All machines in the F-serie can be equipped with XSPACE and there are three different folding beam rails: 10, 12 and 25 mm. Enjoy greater freedom with extra space around the folding beam, XSPACE gives you all the space you need.

  • Control system ProLink W
  • Motorized back gauge FLEXIBLE
  • Hardened Tooling
  • Squaring Arm
  • Different Folding Beam Widths
  • Tool cart
  • Offline software
  • Safety laser scanner
  • Ball transfers
  • Movable foot pedal on rail
  • Solid front fingers
  • Extra foot pedal
  • Segmented radius rail
  • Brushes in the back gauge table
  • XTAP – conical bending
  • Manual conical bending

Eiginleikar

Model Working length Folding capacity Opening height Outer dimensions Weight Motor
  mm Steel mm Stainless steel
mm
Aluminium mm Clamping beam mm Length x Width x Height mm kg Clamping beam kW Folding beam kW
FX26 Combi 2600 2.5 1.6 3.7 150 3658 x 1055 x 1970 3180 1.5 kW 1.5 kW
FX32 Combi 3200 2 1.2 3 150 4258 x 1055 x 1970 3648 1.5 kW 1.5 kW
FX41 Combi 4100 2 1.2 3 150 5158 x 1055 x 1970 4434 1.5 kW 2.2 kW

Myndbönd

Bæklingur

cidan-catalogue-2018-en

Viðbætur

    • XSPACE – More space, more profiles – CIDAN XSPACE gives you far greater freedom to design and fold your profiles. XSPACE is the folding beam with an indented angle below the folding point giving you extra space  around the tools. You can now easily make profiles that were previously difficult or impossible to fold and without risk of collisions. The 15 mm extra space below the folding beam rail allows you to fold trapezoid profiles, z-profiles and hat profiles. There is no need to “force” the material into the machine, ergonomics are improved and safety increased. You get higher precision with no effort. All the machine’s features function as normal. The XSPACE-beam is of course equipped with crowning for zero angle deviations for long profiles. All machines in the F-serie can be equipped with XSPACE and there are three different folding beam rails: 10, 12 and 25 mm. Enjoy greater freedom with extra space around the folding beam, XSPACE gives you all the space you need.

  • Control system ProLink W
  • Motorized back gauge FLEXIBLE
  • Hardened Tooling
  • Squaring Arm
  • Different Folding Beam Widths
  • Tool cart
  • Offline software
  • Safety laser scanner
  • Ball transfers
  • Movable foot pedal on rail
  • Solid front fingers
  • Extra foot pedal
  • Segmented radius rail
  • Brushes in the back gauge table
  • XTAP – conical bending
  • Manual conical bending

Eiginleikar

Model Working length Folding capacity Opening height Outer dimensions Weight Motor
  mm Steel mm Stainless steel
mm
Aluminium mm Clamping beam mm Length x Width x Height mm kg Clamping beam kW Folding beam kW
FX26 Combi 2600 2.5 1.6 3.7 150 3658 x 1055 x 1970 3180 1.5 kW 1.5 kW
FX32 Combi 3200 2 1.2 3 150 4258 x 1055 x 1970 3648 1.5 kW 1.5 kW
FX41 Combi 4100 2 1.2 3 150 5158 x 1055 x 1970 4434 1.5 kW 2.2 kW

Myndbönd

Bæklingur

cidan-catalogue-2018-en

Upplýsingar

  • 30° Straight rail
  • ProLink control, with touch screen and graphic programming
  • Segmented straight rail
  • The standard Combi beam offers flexibility like no other tooling system. With a simple rotation of the upper beam, switch between the straight rail and box tooling in a matter of seconds. Form a larger variety of parts with little or no tool changing
  • Folding beam rails 7 mm, 10 mm and 20 mm equipped with bayonet quick change tooling
  • Tooling is made from 42CrMo4 steel, and coated with black oxide to prevent rust
  • Adjustable crowning of folding beam rail.
  • Material thickness sensing on clamping beam
  • Eccentric clamping beam drive-33 tons clamping pressure
  • Speed optimization-when folding beam comes down to 80 degrees, upper beam starts to come up

Viðbætur

    • XSPACE – More space, more profiles – CIDAN XSPACE gives you far greater freedom to design and fold your profiles. XSPACE is the folding beam with an indented angle below the folding point giving you extra space  around the tools. You can now easily make profiles that were previously difficult or impossible to fold and without risk of collisions. The 15 mm extra space below the folding beam rail allows you to fold trapezoid profiles, z-profiles and hat profiles. There is no need to “force” the material into the machine, ergonomics are improved and safety increased. You get higher precision with no effort. All the machine’s features function as normal. The XSPACE-beam is of course equipped with crowning for zero angle deviations for long profiles. All machines in the F-serie can be equipped with XSPACE and there are three different folding beam rails: 10, 12 and 25 mm. Enjoy greater freedom with extra space around the folding beam, XSPACE gives you all the space you need.

  • Control system ProLink W
  • Motorized back gauge FLEXIBLE
  • Hardened Tooling
  • Squaring Arm
  • Different Folding Beam Widths
  • Tool cart
  • Offline software
  • Safety laser scanner
  • Ball transfers
  • Movable foot pedal on rail
  • Solid front fingers
  • Extra foot pedal
  • Segmented radius rail
  • Brushes in the back gauge table
  • XTAP – conical bending
  • Manual conical bending

Eiginleikar

Model Working length Folding capacity Opening height Outer dimensions Weight Motor
  mm Steel mm Stainless steel
mm
Aluminium mm Clamping beam mm Length x Width x Height mm kg Clamping beam kW Folding beam kW
FX26 Combi 2600 2.5 1.6 3.7 150 3658 x 1055 x 1970 3180 1.5 kW 1.5 kW
FX32 Combi 3200 2 1.2 3 150 4258 x 1055 x 1970 3648 1.5 kW 1.5 kW
FX41 Combi 4100 2 1.2 3 150 5158 x 1055 x 1970 4434 1.5 kW 2.2 kW

Myndbönd

Bæklingur

cidan-catalogue-2018-en